|
|
|
Achetez T-Splines ou RhinoGold et bénéficiez d'un forfait prototypage de 500mm3 avec Forgefred 3D Printing Services
|
|
|
Achetez T-Splines ou RhinoGold et bénéficiez d'un forfait prototypage de 500mm3 avec Forgefred 3D Printing Services.
Pour info 1 mm3=0,0154g de métal et donc 1 bague de 8g / 0,0154g = 520 mm3
Vous pourrez alors directement envoyer vos fichiers au format Rhino (3dm) et vous recevrez vos maquettes réalisées en cire sur Solidscape avec une résolution de 25 microns (seul les frais de port restent à votre charge).
Forgefred 3D Printing Services est un service bureau spécialisé dans le prototypage en cire pour la bijouterie/Joaillerie. La tarification au forfait commence à 0.05 euros ht / mm3.
|
|
 |
| Please use the following free project tutorials to help you learn RhinoCAM. Each project is tailored to show the user different machining methods and the situations under which these machining methods will be used.
Each project download include the project tutorial file, the design files along with the programmed machining methods as well as the G-code files.
It should be noted that each project was actually machined on a Techno-Isel 3-axis milling machine and proofed out. The G-code files are included in the download. You can run these G-code files if you own a Techno-Isel machine. Care should be taken, however to make sure to duplicate the setups described in the included tutorial document.
|
Name
|
Machining Methods used
|
Download
|
|
Gasket
|
Simple 2 ½ Axis Profiling tutorial using a single ¼ inch Flat end mill |
|
|
Slotted gear
|
Tutorial that shows how to cut slots. Uses a single ¼ inch Flat Mill tool and employs 2 machining operations, 2 ½ Axis Profiling and Engraving |
|
|
Geneva Mechanism
|
Uses a single ¼ inch Flat end mill tool and 2 setups and shows how to use 2 ½ Axis Profiling, facing and hole pocketing operations. Good hobby project. |
|
|
Shaft Base
|
Shows how to perform multiple level machining. Employs 2 ½ Axis Pocketing, profiling, facing, hole pocketing and engraving. |
|
|
Penholder
|
Shows how to use a simple 3 axis machining operation in conjunction with a 2 ½ Axis Profiling operation. Uses a single ¼ inch Flat Mill tool |
|
|
Clock
|
More complex project involving multiple 3 and 2 ½ Axis operations. Profiling, facing, hole pocketing, 3 axis horizontal roughing, parallel finishing, curve machining and pencil tracing. Uses ¼ inch Flat Mill for roughing and 1/8 inch Ball Mill tool for finishing. |
|
|
Wheel
|
Shows how to machine a two-sided part using 2 ½ Axis Pocketing, profiling, hole pocketing and engraving. |
|
|
Head Model
|
Shows how to machine 2 sided part using 3 axis operations with emphasis on part holding using tabs. Employs 3 Axis Horizontal Roughing and parallel finishing machining operations. Uses a ¼ inch Flat Mill and 1/8, 1/16 inch Ball Mill tools |
|
|
F1 Car
|
Machining a two-sided part using 3 Axis Horizontal Roughing and parallel finishing
|
|
|
3 D Sign
|
A tutorial showing how to machine a wood sign. Uses 2 ½ axis profiling, 3 Axis Horizontal roughing, parallel finishing, curve machining and pencil tracing. Uses ¼ inch Flat Mill and 1/8, 1/16 inch Ball Mill tools |
|
|
Simple V Carving
|
Illustrates how to perform V-carving using a tapered V bit. |
|
|
Ring Mold
|
Shows machining a 2 piece mold for creating a ring. Uses 3 axis horizontal roughing, parallel finishing, radial finishing and 2 ½ axis facing. Uses multiple setups and multiple tools. |
|
|
|
|
|
Essai gratuit RhinoCam
|
 |
|
Cette version d'essai gratuite en français est identique à la version dont vous disposerez après votre d’acquisition (version commerciale).
Vous bénéficiez de 25 sauvegardes. Après quoi, toutes les fonctions du logiciel resteront disponibles hormis les fonctions d’enregistrement.
Attention ! si l'email n'est pas correcte rien de vous parviendra.
Merci de votre intérêt pour nos produits.
CADLINK
+33 1 69 34 81 85
|
|
|
|
Appelez nous
|
|
|
|
|
|
|